Mitsubishi 2013 Outlander Скачать руководство пользователя страница 357

Страница: 357 / 602

4-4

Driving safety

To install the floor mat

N00628700047

1. Place the floor mat to fit the shape of the floorboard.
2. Align the floor mat with the installation holes over the

retaining clips.

3. Secure the floor mat with retaining clips.

NOTE

●

The shape of the mat and the number of retaining clips

may vary depending on the vehicle model.

WARNING

●

If a floor mat is the wrong size or is not properly

installed, it can interfere with the operation of the

pedals. Interference with the pedals can cause unin-
tended acceleration and/or increased stopping dis-

tances resulting in a crash and injury. Always make

sure the floor mat does not interfere with the accel-
erator or brake pedal.

●

Always use the retaining clip on the driver’s floor-

board to secure the floor mat.

●

Always install the mat with the correct side facing

down.

●

Never install a second mat over or under an existing
floor mat.

●

Do not use a floor mat designed for another model

vehicle even if it is a Mitsubishi genuine floor mat.

BK0150700US.book 4

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 357 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: