Mitsubishi 2013 Outlander Скачать руководство пользователя страница 143

Страница: 143 / 602

3-46

Features and controls

To close

Pull the liftgate grip (A) downward as illustrated and release it

before the liftgate closes completely. Gently slam the liftgate

from the outside so that it is completely closed.

NOTE

●

Gas struts (B) are installed in the locations illustrated in

order to support the liftgate. Please observe the following
in order to prevent damage or faulty operation:

• Do not touch, push or pull the gas struts when closing

the liftgate.

• Do not attach any plastic material, tape, etc., to the gas

struts.

• Do not tie string, etc., around the gas struts.
• Do not hang objects on the gas struts.

CAUTION

●

To avoid injuring your hand or arm, do not attempt

to close the liftgate without releasing the liftgate grip

(A).

●

Before starting the vehicle, be sure to confirm that

the liftgate is locked. If the liftgate opens while driv-

ing the vehicle, objects stored in the luggage com-
partment could fall out into the road.

BK0150700US.book 46

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 143 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: