Mitsubishi 2013 Outlander Скачать руководство пользователя страница 425

Страница: 425 / 602

5-56

Comfort controls

Text message

The radio can receive text messages broadcast by some RBDS

stations.

1. While tuning in to an RBDS station, press the DISP but-

ton.

2. A text message will appear on the display. If a station

name appears, press the DISP button again, then the text

message will be displayed.

3. To cancel the text message display, press the DISP button

again.

NOTE

●

When there is no text message to be displayed, the display

shows “NO MESSAGE” and then shows the frequency.

●

The display can show up to 12 characters. If a text mes-
sage has more than 12 characters, press the PAGE button

to view the next 12 characters.

SIRIUS

Satellite Radio

(if so equipped)

N00760100149

Satellite radio uses direct satellite to receiver broadcasting
technology to provide clear digital sound, coast to coast. The

subscription service provider is SIRIUS Satellite Radio. This

service offers over 100 channels of music, sports, news, enter-
tainment, and programming for listeners, directly from its sat-

ellites and broadcasting studios.

System activation

To activate your SIRIUS Satellite Radio service, call the toll-
free number 888-539-SIRIUS (7474), or visit the Sirius web

site at www.sirius.com. Please have the following information

available when activating your system:

1. The Sirius Identification Number (SIRIUS ID). Refer to

the section “SIRIUS ID indication” on page5-57.

2. Credit card information.
3. Your Vehicle Identification Number. Refer to “Vehicle

identification number plate” on page9-2.

“SIRIUS”, the SIRIUS dog logo and channel names and logos

are trademarks of SIRIUS Satellite Radio, Inc.

BK0150700US.book 56

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 425 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: