Mitsubishi 2013 Outlander Скачать руководство пользователя страница 214

Страница: 214 / 602

Features and controls

3-117

NOTE

●

In addition, the warning display is displayed on the infor-
mation screen in the multi-information display.

Type 1

Type 2

Each tire, including the spare (if provided), should be checked

monthly when cold and inflated to the inflation pressure rec-
ommended by the vehicle manufacturer on the vehicle placard

or tire inflation pressure label. (If your vehicle has tires of a
different size than the size indicated on the vehicle placard or

tire inflation pressure label, you should determine the proper

tire inflation pressure for those tires.)
As an added safety feature, your vehicle has been equipped

with a tire pressure monitoring system (TPMS) that illuminates

a low tire pressure telltale when one or more of your tires is
significantly under-inflated.

Accordingly, when the low tire pressure telltale illuminates,

you should stop and check your tires as soon as possible, and
inflate them to the proper pressure. Driving on a significantly

under-inflated tire causes the tire to overheat and can lead to

tire failure.
Under-inflation also reduces fuel efficiency and tire tread life,

and may affect the vehicle’s handling and stopping ability.

Please note that the TPMS is not a substitute for proper tire
maintenance, and it is the driver’s responsibility to maintain

●

If a malfunction is detected in the tire pressure mon-
itoring system, the tire pressure monitoring system

warning light will blink for approximately 1 minute

and then remain continuously illuminated. The
warning light will issue further warnings each time

the engine is restarted as long as the malfunction

exists.
Check to see whether the warning light goes off after

few minutes driving.

If it then goes off during driving, there is no prob-
lem.

However, if the warning light does not go off, or if it

blinks again when the engine is restarted, have the
vehicle inspected by an authorized Mitsubishi

Motors dealer.

In such situations, a malfunctioning of the system
may be preventing the monitoring of the tire pres-

sure. For safety reasons, when the warning light

appears while driving, avoid sudden braking, sharp
turning and high-speed driving.

CAUTION

BK0150700US.book 117

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 214 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: