Mitsubishi 2013 Outlander Скачать руководство пользователя страница 485

Страница: 485 / 602

6-10

For emergencies

Spare tire information

N00849600331

Compact spare tire

The compact spare tire is stowed beneath the luggage floor
board of the luggage compartment. It is designed to save space

in the luggage compartment. Its lighter weight makes it easier

to use if a flat tire occurs.

WARNING

●

Tires, including spare tire, degrade over time with

age even when they are not being used. It is recom-
mended that tires over 6 years generally be replaced

even if damage is not obvious.

CAUTION

●

While the compact spare tire is stowed, the inflation

pressure should be checked at least once a month to

assure that it remains at the recommended inflation
pressure. See the tire and loading information plac-

ard attached to the driver’s door sill. Refer to “Tire

and loading information placard” on page 9-4.

●

Driving with an improperly inflated tire can cause

an accident. If you have no choice but to drive with
an under-inflated tire, keep your speed down and

avoid sudden steering or braking, if possible. Inflate

the tire to the correct pressure as soon as possible.
Refer to “Tire inflation pressures” on page 7-27.

●

The compact spare tire should be used only tempo-
rarily. While the compact spare tire is being used,

the tire pressure monitoring system will not function

properly. Have the tire replaced or repaired at an
authorized Mitsubishi Motors dealer or a repair

facility of your choice as soon as possible.

●

Do not go over 50 mph (80 km/h) when driving with
the compact spare tire.

●

Avoid sudden starting and braking when driving

with the compact spare tire.

●

Do not drive through automatic car washes and over

obstacles that could possibly damage the underside

of your vehicle. Because the compact spare tire is
smaller than the original tire, there is less clearance

between the ground and your vehicle.

●

Because the compact spare tire is designed only for
your vehicle, do not use it on any other vehicle.

●

Do not put the compact spare tire on a different

wheel, and do not put standard tires, snow tires,
wheel covers or trim rings on the compact spare

wheel. Otherwise, you could damage these parts or

other parts on your vehicle.

●

Do not use tire chains with your compact spare tire.

Using a chain could cause damage to your vehicle

and loss of the chains.

CAUTION

BK0150700US.book 10

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 485 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: