Mitsubishi 2013 Outlander Скачать руководство пользователя страница 148

Страница: 148 / 602

Features and controls

3-51

NOTE

●

The alarm will continue to operate for 3 minutes. At the

end of that period, the alarm will automatically shut off to
save battery power. The system will then be rearmed until

the proper disarming step is taken.

●

The alarm will resume if unauthorized actions are taken
again, even if the alarm has stopped.

●

While the alarm is operating, a warning is displayed on

the information screen in the multi-information display.

Type 1

Type 2

Alarm deactivation

The alarm can be deactivated in the following ways.

●

By using the keyless entry system or the F.A.S.T.-key

operation to lock or unlock the doors and the liftgate.

●

Except for vehicles equipped with the F.A.S.T.-key, by
turning the ignition switch to the “ON” position.

●

For vehicles equipped with the F.A.S.T.-key, by putting
the operation mode in ON.

Disarmed stage

The system will be disarmed if the following operation is per-

formed.

●

Except for vehicles equipped with the F.A.S.T.-key, if the
ignition switch is turned to the “ON” position.

●

For vehicles equipped with the F.A.S.T.-key, if the opera-

tion mode is put in ON.

●

All doors and the liftgate are unlocked by using the key-

less entry system or the F.A.S.T.-key operation.

Disarm...by the keyless entry system or the F.A.S.T.-key
operation

BK0150700US.book 51

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 148 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: