Mitsubishi 2013 Outlander Скачать руководство пользователя страница 488

Страница: 488 / 602

For emergencies

6-13

3. Rotate the jack by hand until the flange portion (B) fits in

the groove (C) at the top of the jack.

4. Insert the bar (D) into the wheel nut wrench (E). Then put

the end of the bar into the shaft’s jack end, as shown in the
illustration.

Slowly rotate the wheel nut wrench until the tire is raised
slightly off the ground surface.

WARNING

●

Stop jacking up the vehicle as soon as the tire is
raised off the ground. It is dangerous to raise the

vehicle any higher.

●

Do not get under your vehicle while using the jack.

●

Do not bump the raised vehicle or leave it sitting on

the jack for a long time. Both are very dangerous.

●

Do not use a jack except the one that came with your
vehicle.

●

The jack should not be used for any purpose other

than to change a tire.

BK0150700US.book 13

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 488 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: