Mitsubishi 2013 Outlander Скачать руководство пользователя страница 55

Страница: 55 / 602

2-28

Seat and restraint systems

Seat belt extender

N00406700191

When your seat belt, even fully extended, is not long enough, a

seat belt extender must be obtained. The extender may be used
for either of the front seats.

WARNING

●

Always adjust the shoulder belt anchor so that the

shoulder belt is positioned across the center of your

shoulder without touching your neck. The shoulder
belt should not be able to fall off your shoulder. Fail-

ure to follow this instruction can adversely affect

seat belt performance and increase the risk of seri-
ous injury or death in the event of an accident.

●

Adjust the shoulder belt anchor only when the vehi-

cle is not in motion.

●

Make sure the anchor is securely locked in position

after adjusting it.

WARNING

●

The extender should only be used if the existing belt

is not long enough. Anyone who can use the stan-

dard seat belt should not use an extender. Unneces-
sary use of an extender can adversely affect seat belt

performance in an accident.

●

When not required, the extender must be removed
and stowed.

BK0150700US.book 28

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 55 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: