Mitsubishi 2013 Outlander Скачать руководство пользователя страница 440

Страница: 440 / 602

Comfort controls

5-71

To find the start of each track on a disc for playback

Press the SCAN button. “SCAN” will appear on the display

and the audio system will play back the first 10 seconds of each
track on the selected disc.

The track number will blink while the scan mode is selected.

To stop the scan mode, press the SCAN button again.

NOTE

●

Once all tracks on the disc have been scanned, playback

of the disc will restart from the beginning of the track that

was playing when scanning started.

●

The scan mode will be canceled when radio or CD opera-

tion is selected.

●

With a disc that contains both CD-DA and MP3 files, the
scan mode causes only files of the same format (CD-DA

only or MP3 files only) to be played.

To eject discs <CD player>

When the eject button is pressed, the disc automatically stops
and is ejected. The system automatically switches to radio

mode.

NOTE

●

If you do not remove an ejected disc before 15 seconds
have elapsed, the disc will be reloaded.

To eject discs <CD changer>

To eject a single disc

Press the eject button briefly to eject the currently selected
disc.

NOTE

●

If you press the eject button while the display is showing

“LOAD DISC No.(1-6)”, the loading standby mode will
be canceled and the next disc will be ejected.

●

If you do not remove an ejected disc before 15 seconds

have elapsed, the disc will be reloaded and the eject mode
will be canceled. The reloaded disc will not be played.

To eject all the discs

1. Press the eject button for 2 seconds or longer (until you

hear a beep).

2. The currently selected disc will be ejected. When you

remove the ejected disc, the next disc will automatically

be ejected.

3. Repeat the above-described steps until all of the discs

have been ejected. The CD changer will then enter load-

ing standby mode.

NOTE

●

If you do not remove an ejected disc before 15 seconds

have elapsed, the disc will be reloaded and the eject mode

will be canceled. The reloaded disc will not be played.

BK0150700US.book 71

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 440 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: