Mitsubishi 2013 Outlander Скачать руководство пользователя страница 168

Страница: 168 / 602

Features and controls

3-71

Startability of automatic transaxle vehicle and CVT

vehicle with ambient temperature of -22

F (-30

C) or

lower

When the ambient temperature is -22

F (-30

C) or lower, it

may not be possible to start from a standstill even with the
selector lever in the “D” (DRIVE) position.

This occurs because the transaxle has not warmed up suffi-

ciently; it does not indicate a problem. If this occurs, place the
selector lever in the “P” (PARK) position and let the engine

idle for at least 10 minutes.

The transaxle will warm up, and you will be able to start nor-
mally.

Do not leave the vehicle during warm-up operation.

Manual transaxle

(if so equipped)

N00512700126

The shift pattern below is shown on the gearshift lever. Press
the clutch pedal all the way down while shifting gears.

NOTE

●

During cold weather, shifting may be difficult until the

transaxle lubricant has warmed up. This is normal and not
harmful to the transaxle.

To start

Press the clutch pedal all the way down and shift into 1st or

“R” (Reverse) position. Then gradually release the clutch pedal

while depressing the accelerator pedal.

BK0150700US.book 71

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 168 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: