Mitsubishi 2013 Outlander Скачать руководство пользователя страница 442

Страница: 442 / 602

Comfort controls

5-73

ID3 tag information

The audio system can display ID3 tag information for files that
have been recorded with ID3 tag information.

1. Press the DISP button for 2 seconds or longer to switch to

the ID3 tag information. “TAG” indicator will appear on

the display.

2. Press the DISP button repeatedly to make selections in the

following sequence: album name

→

track name

→

artist

name

→

normal display mode.

NOTE

●

To return from ID3 tag information to the folder name,
press the DISP button again for 2 seconds or longer.

●

When there is no title information to be displayed, the dis-

play shows “NO TITLE”.

●

The display can show up to 12 characters. If a folder

name, track name, or item of ID3 tag information has

more than 12 characters, press the PAGE button to view
the next 12 characters.

●

Folder names and track names can each be displayed up to

a length of 32 characters. Items of ID3 tag information
can each be displayed up to a length of 30 characters.

●

Characters that the audio system cannot display are shown

as “•”.

To play tracks from USB device (if so

equipped)

N00762200043

You can connect your iPod or USB memory device to the USB
input terminal and play music files stored in the iPod or USB

memory device.

See the following section for the types of connectable devices
and supported files.

Refer to “Types of connectable devices and supported file

specifications” on page 3-235.
See the following sections for the connecting methods, “How

to connect an iPod” on page 3-233 and “How to connect a USB

memory device” on page 3-231.
If your vehicle is equipped with a Bluetooth

2.0 interface,

you can play music files in your iPod or USB memory device

via voice operation.

Refer to “To play iPod tracks via voice operation” on page 5-77
and “To play USB memory device tracks via voice operation”

on page 5-87.

NOTE

●

A file protected by copyright might not be able to start
playback.

●

It is recommended to leave the equalizer of the connected

device flat.

BK0150700US.book 73

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 442 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: