Mitsubishi 2013 Outlander Скачать руководство пользователя страница 152

Страница: 152 / 602

Features and controls

3-55

Lock switch

N00549000130

When this switch is in the lock mode, the passenger door

switches cannot be used to open or close the door windows,
and the main switch will open or close only the driver’s door

window. To unlock the switch, press it again.

Safety mechanism (Driver’s door window only)

N00528800106

If a hand or head is trapped, for safety the door window is auto-

matically lowered a little.
After the door window is lowered, pull up the switch again to

close the door window.

1- Lock
2- Unlock

WARNING

●

Before driving with a child in the vehicle, be sure to

lock the window switch to make it inoperative. Chil-
dren tampering with the switch could easily trap

their hands or heads in the window.

WARNING

●

If the safety mechanism is activated three or more

times successively, the safety mechanism will be tem-
porarily cancelled.

If a hand or head got trapped, a serious injury could

result.

CAUTION

●

The safety mechanism is deactivated just before the

door window closes. This allows the door window to

close completely. Therefore be especially careful that
fingers are not trapped in the door window opening.

●

The safety mechanism is deactivated while the

switch is pulled up. Therefore be especially careful
that fingers are not trapped in the door window

opening.

●

Do not deliberately trap your hands or head in

order to activate the safety mechanism.

Your hand or head could be trapped and personal
injury could result.

BK0150700US.book 55

ページ

２０１２年３月２２日　木曜日　午後６時４６分

Содержание 2013 Outlander



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2013 Outlander

Отзывы:

Mitsubishi 2013 Outlander, Руководство по обслуживанию, Страница: 152 / 602

Результаты поиска

Содержание 2013 Outlander

Отзывы: