LABORIE NXT Series Скачать руководство пользователя страница 72

Страница: 72 / 116

Maintenance and Service

NXT Owner’s Manual, NXT-UM01, MAN2010

5.1.1.2 Cleaning and Disinfection Frequency

•

Cleaning –

After each use, all devices should be visually inspected and cleaned

to remove any debris or soiling.

•

Disinfection –

Devices should be disinfected in accordance with the frequency

defined below.

Roam NXT, PIM NXT, Urocap NXT:

Perform disinfection after the device has

contact with the patient’s skin, after contamination has been observed (e.g.

presence of urine on the device), or, at minimum, daily.

Docking Station, Pump, PC:

Perform disinfection of the device, at minimum,

once a week.

5.1.1.3 Methods and Tools

•

All cleaning and disinfection should be performed using moistened cloths and a

soft bristle brush.

•

No additional tools are required for cleaning or disinfection.

•

Inspect the Cart, Shelves, Computer, NXT modules, and peripherals (such as

keyboards and computer mouse) for physical damage or wear and tear prior to

cleaning.

•

Ensure the charging contacts for all modules are wiped free of debris and

contaminants.

•

Optional reusable accessories used in conjunction with the NXT System should be

cleaned and/or disinfected according to the instructions contained in their device

specific Instructions for Use. Refer to the

Introduction

section on page

overview of standard equipment and accessories.

CAUTION:

No abrasive tools should be used. Do not spray the cleaning reagents on

the NXT System components, modules, accessories, or peripherals. Do not autoclave the

NXT System components, modules, accessories, or peripherals or clean them with sharp

tools or abrasives. Do not immerse or rinse the NXT System components, modules,

accessories, or peripherals. Do not immerse electrical connectors in water or other liquids.

Cleaning and Disinfection Preparation

To begin cleaning or disinfection preparation, complete the following:

Put on gloves and safety glasses.

Obtain the module for cleaning and select the cleaning wipes.

Put on any other specific personal protective equipment recommended by the

wipe’s manufacturer.

Ensure a stable surface is available to place any modules or parts that may need

to be separated from the NXT System during the cleaning and disinfection process

in the designated reprocessing area.

5.1.2.1 Containment and Transportation

Transport the soiled device individually in a closed container to a designated cleaning and

disinfection area.

•

Do not transport the device in a container with other devices.

•

Do not soak the device prior to cleaning.

Transport the cart by first adjusting the system into the transportation mode described in

the

Safely Moving the Cart

section on page

. To limit cross contamination, push the cart

slowly to the designated cleaning area and avoid contact with other objects.

Содержание NXT Series





















































































































Результаты поиска

Содержание NXT Series

Отзывы:

Похожие инструкции для NXT Series

Бренды по названию

Популярные бренды

LABORIE NXT Series, Руководство пользователя

Результаты поиска

Содержание NXT Series

Отзывы:

Похожие инструкции для NXT Series

Бренды по названию

Популярные бренды