Synergy Software
NXT Owner’s Manual NXT-UM01, MAN2010
54
Click the
Phases
tab on the
Workflow Configuration
Window. Select a phase
to customize from those listed. Scroll down to the control panel section located at
the bottom of the window. Refer to Figure 40.
Figure 40: Workflow Configuration Window - Control Panel
Verify that the desired number of Control Panel buttons are provided. Use the
Row Count
and
Column Count
fields to increase or decrease the number of
buttons shown in the control panel.
To add or change a button’s label, click on the button to launch the
select
action
for button
window (Figure 41). Select the label of choice and press
OK
. To
remove a button label, click the button to be adapted and select
Empty Button
in
the action window; click
OK
to implement the change.
Figure 41: Action Window – Adding, Changing or Emptying Button Label
