LABORIE NXT Series Скачать руководство пользователя страница 99

Страница: 99 / 116

Hardware

NXT Owner’s Manual, NXT-UM01, MAN2010

6.6.1.3 Removing and Attaching the Clip

Individually press a single prong of the clip sideways across the Roam NXT until it clicks out

of the latch. Repeat with all four prongs of the clip and pull the clip away from the Roam

NXT.
To attach the clip, gently slide the prongs into their latches which will produce an auditory

click. Ensure that the clip is securely fastened before using the clip or mounting the Roam

NXT. Follow the same instructions to attach or detach the clip located on the PIM NXT

(Figure 80).

Figure 80: Removing the Roam NXT and PIM NXT Clips

Roam NXT—Charging the Battery

Place the Roam NXT on its docking station. The NXT Docking Station located on the cart

provides docking stations for the Roam NXT. To ensure a proper connection, make sure the

device clicks into place. A beeping sound signifies the Roam NXT is fully connected. If the

battery of the Roam NXT is completely drained, the device will not beep when inserted into

the docking station.
Table 11 indicates the different statuses for the Roam NXT and its battery. LABORIE

recommends for the user to have the device plugged in, or for the device to have at least 1-

2 hours of battery charge before beginning a test. Always return the Roam NXT device to

the NXT Docking Station at the completion of working hours to ensure full charge for the

next study period.

Battery Status

Roam NXT Status

Roam NXT

Flashing Green: Charging, not at

full capacity
(When removed from docking

station the indicator will change to

amber if charge is insufficient)

Green: Ready to use (for at least 2

hours of recording)

Solid Green: Charged (Battery

charging complete; plugged in and

at full capacity)

Содержание NXT Series





















































































































Результаты поиска

Содержание NXT Series

Отзывы:

Похожие инструкции для NXT Series

Бренды по названию

Популярные бренды

LABORIE NXT Series, Руководство пользователя

Результаты поиска

Содержание NXT Series

Отзывы:

Похожие инструкции для NXT Series

Бренды по названию

Популярные бренды