LABORIE NXT Series Скачать руководство пользователя страница 14

Страница: 14 / 116

Introduction

NXT Owner’s Manual NXT-UM01, MAN2010

1.5 About this Manual

The NXT Owner’s Manual is intended to provide important information and instruction

regarding the use of the NXT System.

Manual Symbols

This manual provides important information to help in understanding the features and safe

use of the NXT System and its modules. The symbols outlined below highlight helpful tips

and important cautions that will aide in guiding the reader through the manual.

Symbol

Description

Caution/warning symbol describes information that the user

needs to know to prevent minor injury or product damage.

Important symbol describes important information about

using the device.

Note symbol describes additional information about the

device.

1.6 Software and Equipment

Software Install

Synergy software is installed prior to shipping. The supported operating system for Synergy

Software is Microsoft Windows

10.0. For the end-user software license agreement, visit

http://www.laborie.com/terms-and-conditions/end-user-software-license-agreement/

IMPORTANT:

•

Ensure that Windows automatic updates are always enabled.

•

LABORIE strongly recommends that BitLocker remain enabled on the NXT system

to comply with the HIPAA standard regarding data privacy and security.

•

Ensure that an antivirus program is always enabled. For more information about

the use of antivirus programs, refer to the

Computer Virus Protection

section on

page

•

Do not upgrade any Microsoft Windows

10.0 PC or laptop to any other version of

Microsoft Windows

. The UDS Urodynamics system and software provided by

LABORIE are tested as a complete package and will not work correctly after

updating the operating system. Contact your LABORIE support representative for

more information.

•

Changes to the Windows Group Policies may prevent the NXT system from

operating correctly. Before making any Group Policy changes, contact your

LABORIE support representative for guidance to confirm if changes can be safely

made.

•

To install any updates for the Synergy software, contact your LABORIE support

representative for guidance.

•

Access Synergy

Software Version

Serial Number

System Fingerprint

, and

GS1

information by navigating to the System Settings window under the Settings

Содержание NXT Series





















































































































Результаты поиска

Содержание NXT Series

Отзывы:

Похожие инструкции для NXT Series

Бренды по названию

Популярные бренды

LABORIE NXT Series, Руководство пользователя

Результаты поиска

Содержание NXT Series

Отзывы:

Похожие инструкции для NXT Series

Бренды по названию

Популярные бренды