LABORIE NXT Series Скачать руководство пользователя страница 104

Страница: 104 / 116

Hardware

NXT Owner’s Manual, NXT-UM01, MAN2010

104

6.9 T-DOC Air-Charged Catheters

The T-DOC NXT Air-Charged Catheter series are part of the next-generation LABORIE

systems designed for use during Urodynamic studies (Figure 87).

Figure 87: T-DOC NXT Air-Charged Catheter

•

The T-DOC Air-Charged Catheters are single-use catheters intended for

Urodynamic pressure monitoring. T-DOC Air-Charged Catheters are provided

sterile and must not be re-used, reprocessed or resterilized.

•

The T-DOC Air-Charged Catheters feature a connector developed for use with the

PIM NXT.

•

The connector is inserted into the charging cavity on the PIM NXT, and a small

amount of air is pumped through the catheter lumen(s) into the air balloon

located at the distal end of the catheter. A tactile click indicates that the

connector is securely locked in the PIM NXT.

•

When external pressure is applied to the balloon, the pressure transducer

registers this pressure differential and sends the data to the Roam NXT. For

information on how to setup the T-DOC Air-Charged Catheters, refer to the

Setting Up T-DOC Air Charged Catheters

section on page

•

To disconnect the catheter from the PIM NXT, press down on the thumb tab and

gently pull the connector from the PIM NXT.

•

T-DOC catheters provide the option of an integrated infusion lumen that connects

to the LABORIE Infusion Pump Tubing. Each catheter connector contains a

SmartSense tag that allows the user to scan information into the Synergy

software facilitating consumable traceability.

•

The connectors are color coded as per industry standard (Figure 88)—blue(Pves),

red(Pabd), and yellow(Pura).

Figure 88: T-DOC NXT Catheters – Color Coding

•

The PIM NXT uses an equivalent color-coding strategy to allow the user to match

color coded transducers to catheters of the same color (Figure 89). The PIM NXT

Содержание NXT Series





















































































































Результаты поиска

Содержание NXT Series

Отзывы:

Похожие инструкции для NXT Series

Бренды по названию

Популярные бренды

LABORIE NXT Series, Руководство пользователя

Результаты поиска

Содержание NXT Series

Отзывы:

Похожие инструкции для NXT Series

Бренды по названию

Популярные бренды