IBM System x iDataPlex dx360 M2, Руководство по диагностике и обслуживанию

Страница: 154 / 264

3. If an expansion enclosure is installed, remove it (see “Removing an expansion
enclosure from a system-board tray” on page 131); otherwise, remove the
system-board tray cover (see “Removing the system-board tray cover” on page
125).
4. Remove the PCIe riser-card assembly, if one is installed (see “Removing a PCIe
riser-card assembly from the system-board tray” on page 171).
5. Locate the battery on the system board (see “System-board connectors” on
page 11).
6. Use one finger to press the top of the battery clip away from the battery. The
battery pops up when it is released.
7. Use your thumb and index finger to lift the battery from the socket.
8. Dispose of the battery as required by local ordinances or regulations (see the
Environmental Notices and User's Guide on the IBM Documentation CD for
information about disposing of the battery).
Installing the battery
The following notes describe information that you must consider when you are
replacing the battery in the system-board tray.
v
You must replace the battery with a lithium battery of the same type from the
same manufacturer.
v To order replacement batteries, call 1-800-426-7378 within the United States, and
1-800-465-7999 or 1-800-465-6666 within Canada. Outside the U.S. and
Canada, call your IBM marketing representative or authorized reseller.
v
After you replace the battery, you must reconfigure the system-board tray and
reset the system date and time.
v To avoid possible danger, read and follow the following safety statement.
Statement 2:
CAUTION:
When replacing the lithium battery, use only IBM Part Number 33F8354 or an
equivalent type battery recommended by the manufacturer. If your system has
a module containing a lithium battery, replace it only with the same module
type made by the same manufacturer. The battery contains lithium and can
explode if not properly used, handled, or disposed of.
Do not:
v
Throw or immerse into water
v Heat to more than 100°C (212°F)
v
Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
To install the battery, complete the following steps.
138
System x iDataPlex dx360 M2: Problem Determination and Service Guide