IBM System x iDataPlex dx360 M2, Руководство по диагностике и обслуживанию

Страница: 149 / 264

Removing the 2U chassis fan assembly
To remove the 2U chassis fan assembly, complete the following steps.
Fan assembly
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 123.
2. If the chassis that contains the fan assembly is installed in an iDataPlex rack,
remove it (see “Removing the 2U chassis from a Type 7825 iDataPlex rack” on
page 186).
3. Remove any installed system-board trays (see “Removing the system-board tray
from a 2U chassis” on page 126).
4. Remove the top cover (see “Removing the 2U chassis fan-assembly top cover”
on page 135).
5. Grasp the tab at each end of the fan assembly and lift it out of the chassis.
6. If you are instructed to return the fan assembly, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
Chapter 5. Removing and replacing server components
133