IBM System x iDataPlex dx360 M2, Руководство по диагностике и обслуживанию

Страница: 216 / 264

1. Install the microprocessor.
Attention: Do not use any tools or sharp objects to lift the locking lever on the
microprocessor socket. Doing so might result in permanent damage to the
system board.
Microprocessor
release lever
Microprocessor
retainer
a. Rotate the locking lever on the microprocessor socket from its closed and
locked position until it stops in the fully open position (approximately a 135°
angle), as shown.
b. Rotate the microprocessor retainer on the microprocessor socket from its
closed position until it stops in the fully open position (approximately a 135°
angle), as shown.
c. Touch the static-protective package that contains the microprocessor to any
unpainted metal surface on the system-board tray or any unpainted metal
surface on any other grounded rack component; then, remove the
microprocessor from the package.
Attention: Handle the microprocessor only by its edges. Do not touch the
contacts on the bottom of the microprocessor or in the microprocessor
socket. Touching these contacts might result in permanent damage to the
system board.
d. Remove the cover from the bottom of the microprocessor.
200
System x iDataPlex dx360 M2: Problem Determination and Service Guide