IBM System x iDataPlex dx360 M2, Руководство по диагностике и обслуживанию

Страница: 203 / 264

2. If the chassis contains a system-board tray that is operating, shut down the
operating system; then, press the power-control button to turn off the
system-board tray (see “Turning off the system-board tray” on page 10 for more
information).
3. Remove any installed system-board trays (see “Removing the system-board tray
from a 2U chassis” on page 126).
4. Remove the two screws that secure the chassis to the rack; then, pull the
chassis forward, lift the chassis out of the iDataPlex rack, and set it on a flat,
static-protective surface.
5. If you are replacing a damaged chassis, remove the fan assembly and power
supply from the chassis, and place them on a static-protective surface or install
them in the new chassis (see “Removing the 2U chassis fan assembly” on page
133 and “Removing a power supply from a 2U chassis” on page 173).
6. If you are instructed to return the 2U chassis, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
Installing the 2U chassis in a Type 7825 iDataPlex rack
To install the 2U chassis in a Type 7825 iDataPlex rack, complete the following
steps.
1. If you are installing a new chassis, install the power supply and fan assembly
that you removed from the old chassis (see “Installing a power supply in a 2U
chassis” on page 174 and “Installing the 2U chassis fan assembly” on page
134).
2. Install the chassis on the rails; then, install the two screws to secure the chassis
to the rack.
3. Install any system-board trays that you removed when you removed the chassis
(see “Installing the system-board tray in a 2U chassis” on page 127).
Chapter 5. Removing and replacing server components
187