IBM System x iDataPlex dx360 M2, Руководство по диагностике и обслуживанию

Страница: 141 / 264

Removing the system-board tray cover
To remove the system-board tray cover, complete the following steps.
1. Read the safety information that begins on page vii and “Installation guidelines”
on page 123.
2. If the system-board tray is installed in a chassis, remove it (see “Removing the
system-board tray from a 2U chassis” on page 126 or “Removing the
system-board tray from a 3U chassis” on page 128).
3. Carefully set the system-board tray on a flat, static-protective surface, with the
cover side up.
4. Pull the cover release latch on each side of the system-board tray outward and
lift the cover open.
5. If you are instructed to return the system-board tray cover, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Installing the system-board tray cover
To install the system-board tray cover, complete the following steps.
Attention: You cannot insert the system-board tray into a chassis until the cover
is installed and closed or an expansion enclosure is installed. Do not attempt to
override this protection.
Chapter 5. Removing and replacing server components
125