Honda 2004 Odyssey, Руководство по обслуживанию

Страница: 205 / 2459

−
−
＊０１
Ｓ０Ｘ４Ａ００Ａ１４６０００１７８０１ＭＡＡＴ００
０１
０１
Ｓ０Ｘ４Ａ００Ａ１４６６６３０００００ＫＡＡＴ００
Cylinder Head Height
Standard (New): 120.95 121.05 mm
(4.762 4.766 in.)
Camshaft Holder Bolt Loosening Sequence
6-38 6-38
Cylinder Head
Cylinder Head Inspection for
Warpage Rocker Arm Assembly Removal
PRECISION STRAIGHT EDGE
A
A
1. Remove the cylinder head (see page 6-35).
2. Inspect the camshaft (see page 6-43).
3. Check the cylinder head for warpage. Measure
along the edges, and three ways across the center.
• If warpage is less than 0.05 mm (0.002 in.),
cylinder head resurfacing is not required.
• If warpage is between 0.05 mm (0.002 in.) and
0.2 mm (0.008 in.), resurface the cylinder head.
• Maximum resurface limit is 0.2 mm (0.008 in.)
based on a height of 121 mm (4.76 in.).
1. Remove the cylinder head cover (see page 6-34).
2. Loosen the adjusting screws (A).
3. Remove the bolts and the rocker arm assembly.
–1 Unscrew the rocker shaft mounting bolts two
turns at a time, in a crisscross pattern, to
prevent damaging the valves or rocker arm
assembly.
–2 When removing the rocker arm assembly, do
not remove the rocker shaft mounting bolts.
The bolts will keep the springs and the rocker
arms on the shafts.
03/07/29 09:11:45 61S0X050_060_0038