Honda 2004 Odyssey, Руководство по обслуживанию

Страница: 448 / 2459

−
−
−
−
−
−
−
−
−
−
−
−
＊０９
＊０６
Ｓ０Ｘ４ＡＺ１Ｋ７７１０００９０３０１ＦＡＡＴ００
YES
NO
YES
NO
YES
NO
DTC P0301 ’01 Model:
DTC P0302 ’01 Model:
DTC P0303 ’01 Model:
DTC P0304 ’01 Model:
DTC P0305 ’01 Model:
DTC P0306 ’01 Model:
11-139 11-139
INJECTOR 2P CONNECTOR
JUMPER WIRE
INJ
(’99-00 models: INJ)
PCM CONNECTOR B (25P)
INJ4 (YEL) INJ2 (RED)
INJ6
(WHT/
BLU) INJ3
(BLU) INJ1
(BRN)
INJ5
(BLK/
RED)
49. Connect injector 2P connector terminal No. 2 (No. 1
on ’99-00 models) to body ground with a jumper
wire (see table).
PROBLEM
CYLINDER
DTC WIRE
COLOR
No. 1 P0301 BRN
No. 2 P0302 RED
No. 3 P0303 BLU
No. 4 P0304 YEL
No. 5 P0305 BLK/RED
No. 6 P0306 WHT/BLU
50. Check for continuity between body ground and the
PCM connector terminal (see table).
PROBLEM
CYLINDER
DTC PCM
TERMINAL
WIRE
COLOR
No. 1 P0301 B11 BRN
No. 2 P0302 B5 RED
No. 3 P0303 B15 BLU
No. 4 P0304 B4 YEL
No. 5 P0305 B3 BLK/RED
No. 6 P0306 B6 WHT/BLU
Replace the injector, then recheck.
Repair open in the wire between the PCM and
the injector.
1. Remove the intake manifold cover and the ignition
2. After checking and recording the freeze data, reset
the PCM (see page 11-4). If there is no freeze data of
misfiring, just clear the DTC.
3. Start the engine, and listen for a clicking sound
from the injector in the problem cylinder.
Go to step 4.
Go to step 31.
4. Turn the ignition switch OFF.
5. Exchange the ignition coil from the problem
cylinder with one from another cylinder.
6. Test-drive the vehicle several times in the range of
the freeze data or under various conditions if there
was no freeze data.
7. Check for a DTC or a Temporary DTC with the scan
tool or the HDS.
Go to step 8.
Intermittent misfire due to ignition coil fouling,
etc. (no misfire at this time).
(cont’d)
No. 1 Cylinder Misfire
Detected
No. 2 Cylinder Misfire
Detected
No. 3 Cylinder Misfire
Detected
No. 4 Cylinder Misfire
Detected
No. 5 Cylinder Misfire
Detected
No. 6 Cylinder Misfire
Deteced
Wire side of female terminals
Wire side of female terminals
Is ther e continuity?
Does the injector click?
Is DT C P0301, P0302, P0303, P0304, P0305, or
P0306, or T empor ar y DT C P1399 indicated?
03/07/29 09:21:28 61S0X050_110_0139
coil cover (see steps 11 and 12 on page 6-36).