Honda 2004 Odyssey, Руководство по обслуживанию

Страница: 1882 / 2459

＋ −
＋ −
−
＋ −
−
Cavity Wire Test condition Test: Desired result Possible cause if result is not obtained
22-203
5. Reconnect the 18P connector to the power window control unit, and reconnect the passenger’s multiplex control
unit. Then make these input tests at the connector.
• If any test indicates a problem, find and correct the cause, then recheck the system.
• If all the input tests prove OK, the control unit must be faulty; replace it.
•
•
•
•
•
•
•
•
•
•
•
17 GRN/YEL Ignition switch ON
(II) Check for voltage between
the No. 17 (
) and No. 9 ( )
terminals:
There should be battery
voltage.
Faulty power window control
unit
Faulty power window motor
Faulty pulser
An open in the wire
9 YEL/BLU
5 GRN/RED While operating
the driver’s
window switch Check for voltage between
the No. 5 (
) and No. 9 ( )
terminals:
There should be pulse
voltage.
An analog voltmeter needle
should move back and forth
(0
5 V) alternately.
A digital voltmeter should
show the average voltage
of about 2.5 V.
16 YEL/WHT While operating
the driver’s
window switch Check for voltage between
the No. 16 (
) and No. 9 ( )
terminals:
There should be pulse
voltage.
An analog voltmeter needle
should move back and forth
(0
5 V) alternately.
A digital voltmeter should
show the average voltage
of about 2.5 V.
17 GRN/YEL Ignition switch ON
(II) Check for voltage between
the No. 17 terminal and body
ground:
There should be battery
voltage. Faulty power window control
unit
Faulty power window motor
Short to ground
03/07/29 10:24:08 61S0X050_220_0205