Honda 2004 Odyssey, Руководство по обслуживанию

Страница: 1264 / 2459

−
−
−
−
−
−
０１
＊０３
＊０５
DTC Appropriate Terminal
YES
NO
DTC Appropriate Terminal
YES
NO
19-63
JUMPER
WIRE
ABS FAIL-SAFE RELAY CONNECTOR
SOLENOID
(BRN/BLK)
ABS CONTROL UNIT CONNECTOR B (12P)
FL-OUT (YEL/BLU)
RL-OUT (YEL/GRN)
RR-OUT
(YEL/WHT) FR-OUT
(YEL/BLK)
RR-IN (RED/WHT) FR-IN (RED/BLK)
FL-IN (RED/BLU)
RL-IN (RED/GRN)
ABS CONTROL UNIT CONNECTOR B (12P)
12. Connect the ABS fail-safe relay connector terminal
No. 2 to body ground with a jumper wire.
NOTE: The wire colors of the ABS fail-safe relay
connector; are WHT/GRN, BRN/BLK, BLK, YEL/GRN.
13. Check the resistance between the appropriate ABS
control unit connector B (12P) terminal and body
ground (see table).
IN: 8
10 (at 20°C, 68°F)
OUT: 3 5 (at 20°C, 68°F)
31: FR-IN No. 11
32: FR-OUT No. 6
33: FL-IN No. 9
34: FL-OUT No. 4
35: RR-IN No. 8
36: RR-OUT No. 3
37: RL-IN No. 10
38: RL-OUT No. 5
Go to step 14.
Replace the modulator unit.
14. Disconnect the modulator unit connector, and
remove the jumper wire from the ABS fail-safe
relay connector terminal.
15. Check for continuity between the appropriate ABS
control unit connector B (12P) terminal and all other
solenoid circuit terminals (see table).
31: FR-IN No. 11
32: FR-OUT No. 6
33: FL-IN No. 9
34: FL-OUT No. 4
35: RR-IN No. 8
36: RR-OUT No. 3
37: RL-IN No. 10
38: RL-OUT No. 5
Repair the short in the appropriate wires
between the ABS control unit and the modulator
unit.
Go to step 16.
(cont’d)
Terminal side of female terminals
Wire side of female terminals
Wire side of female terminals
Is the r esistance OK ?
Is ther e continuity?
03/07/29 09:55:49 61S0X050_190_0063