Honda 2004 Odyssey, Руководство по обслуживанию

Страница: 1417 / 2459

０８
０９
20-52
Glass
Sliding Door Glass Replacement (cont’d)
12 mm (0.47 in.)
A
B
A
B
4 mm
(0.15 in.)
A
B
10 mm (0.39 in.) 10 mm (0.39 in.)
A
A
B
10 mm
(0.39 in.)
9 mm
(0.35 in.)
10 mm
(0.39 in.)
A
A
B
: Apply glass primer here.
13. Attach the rubber dam (A) with adhesive tape
(NITTO 501M, or equivalent) to the inside surface of
the glass (B) as shown. Be careful not to touch the
glass where adhesive will be applied.
14. With a sponge, apply a light coat of glass primer
along the edge of the glass (A) and molding (B) as
shown, then lightly wipe it off with gauze or
cheesecloth:
• Do not apply body primer to the sliding door
glass, and do not get body and glass primer
sponges mixed up.
• Never touch the primed surfaces with your hands.
If you do, the adhesive may not bond to the
sliding door glass properly, causing a leak after
the sliding door glass is installed.
• Keep water, dust, and abrasive materials away
from the primed surface.
03/07/29 10:01:35 61S0X050_200_0054