Honda 2004 Odyssey, Руководство по обслуживанию

Страница: 1948 / 2459

Cavity Wire Test condition Test: Desired result Possible cause if result is not obtained
22-269
5. Reconnect the driver’s multiplex control unit to the fuse/relay box, and perform the following input tests at the
appropriate connectors on the back of the fuse/relay box (see page 22-76).
• If any test indicates a problem, find and correct the cause, then recheck the system.
• If all the input tests prove OK, go to step 6.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
O9 BLU/WHT Ignition key is in
the ignition switch Check for voltage to ground:
There should be less than 1 V. Poor ground (G401)
Faulty ignition key switch
An open in the wire
Short to ground
Ignition key is out
of the ignition
switch Check for voltage to ground:
There should be 5 V or more.
A3 GRN/ORN Driver’s door open Check for voltage to ground:
There should be less than 1 V. Faulty driver’s door switch
An open in the wire
Short to ground
Driver’s door
closed Check for voltage to ground:
There should be 5 V or more.
A10 GRN/YEL Left sliding door
open Check for voltage to ground:
There should be less than 1 V. Faulty left sliding door switch
An open in the wire
Short to ground
Left sliding door
closed Check for voltage to ground:
There should be 5 V or more.
B8 ORN Tailgate open Check for voltage to ground:
There should be 1 V or less. Poor ground (G552)
Faulty tailgate latch switch
An open in the wire
A short to ground
Tailgate closed Check for voltage to ground:
There should be 5 V or more.
B6 YEL Hood open Check for voltage to ground:
There should be 1 V or less. Poor ground (G201)
Faulty hood switch
An open in the wire
A short to ground
Hood closed Check for voltage to ground:
There should be 5 V or more.
B9 GRY Left sliding door
lock knob unlocked
(door fully closed) Check for voltage to ground:
There should be 1 V or less. Poor ground (G581)
Faulty left sliding door lock
knob switch
Poor junction connector
connection
An open in the wire
A short to ground
Left sliding door
lock knob locked
(door fully closed) Check for voltage to ground:
There should be 5 V or more.
: ’01-04 EX and ’02-04 EXL models
(cont’d)
03/07/29 10:25:51 61S0X050_220_0271