Honda 2004 Odyssey, Руководство по обслуживанию

Страница: 1839 / 2459

＋
＋
＋
＋
＋
＋
−
−
−
−
−
−
● ●
▲
▼
＊０１
Ｓ０Ｘ４Ａ００Ｊ１０３１１１１３１５１ＣＡＡＴ０１
＊０１
Ｓ０Ｘ４Ａ００Ｊ１０３１１１４９５５１ＦＥＡＴ０２
Audio Unit Connector Inputs and Outputs
Cavity Wire Connect to
Position Resistance
(SEEK)
(VOL.UP)
(VOL.DOWN)
22-160 22-160
Audio System
System Description Radio Remote Switch Test
B
A
C
When replacing an audio unit connector, match the
wires to the cavities listed in the following table. Cavity
1 is not used.
2 WHT/RED ACC (main stereo power
supply)
3 GRN/RED Radio remote switch
4 BLU Security input
5 RED/YEL Right rear speaker ( )
6 BLU/YEL Left rear speaker ( )
7 RED/GRN Front passenger’s speaker
(
)
Right tweeter ( )
8 BLU/GRN Driver’s door speaker ( )
Left tweeter ( )
9 RED/BLK Lights-on signal
10 WHT/BLU Constant power
11 ORN Navigation unit
12 BLU/GRN Navigation unit
13 ORN/BLU Navigation unit
14 WHT/BLK Navigation unit
15 BRN/WHT Right rear speaker ( )
16 GRY/WHT Left rear speaker ( )
17 BRN/BLK Front passenger’s door
speaker (
)
Right tweeter ( )
18 GRY/BLK Driver’s door speaker ( )
Left tweeter ( )
19 RED Dash lights brightness
controller
20 BLK Ground (G502)
: With security alarm system
1. Remove the two screws (A) from the radio remote
switch (B).
2. Remove the radio remote switch from the steering
wheel and disconnect the 2P connector (C).
3. Measure resistance between the No. 1 and No. 2
terminals in each switch position according to the
table.
OFF Approx. 3.6 k
Approx. 990
Approx. 370
Approx. 100
4. If the resistance is not as specifide, replace the
remote switch.
03/07/29 10:22:35 61S0X050_220_0162