Honda 2004 Odyssey, Руководство по обслуживанию

Страница: 47 / 2459

− −
− −
− −
− − ―――
− − ―――
− −
− −
− −
―――
− − ―――
− −
− −
− −
− −
5-speed Automatic Transmission and A/T Differential - 1999-2001 Models (cont’d)
Item Measurement Qualification Standard or New Service Limit
2-14
Standards and Service Limits
Clutch 1st clutch end plate thickness Mark 1 3.10 mm (0.122 in.) When discolored
Mark 2 3.20 mm (0.126 in.) When discolored
Mark 3 3.30 mm (0.130 in.) When discolored
Mark 4 3.40 mm (0.134 in.) When discolored
Mark 5 3.50 mm (0.138 in.) When discolored
Mark 6 3.60 mm (0.142 in.) When discolored
Mark 7 3.70 mm (0.146 in.) When discolored
Mark 8 3.80 mm (0.150 in.) When discolored
Mark 9 3.90 mm (0.154 in.) When discolored
1st-hold clutch end plate thickness 5.00 mm (0.197 in.) When discolored
2nd, 4th and 5th clutch end plate
thickness
Mark 1 2.10 mm (0.083 in.) When discolored
Mark 2 2.20 mm (0.087 in.) When discolored
Mark 3 2.30 mm (0.091 in.) When discolored
Mark 4 2.40 mm (0.094 in.) When discolored
Mark 5 2.50 mm (0.098 in.) When discolored
Mark 6 2.60 mm (0.102 in.) When discolored
Mark 7 2.70 mm (0.106 in.) When discolored
Mark 8 2.80 mm (0.110 in.) When discolored
Mark 9 2.90 mm (0.114 in.) When discolored
3rd clutch end plate thickness Mark 1 3.10 mm (0.122 in.) When discolored
Mark 2 3.20 mm (0.126 in.) When discolored
Mark 3 3.30 mm (0.130 in.) When discolored
Mark 4 3.40 mm (0.134 in.) When discolored
Mark 6 2.60 mm (0.102 in.) When discolored
Mark 7 2.70 mm (0.106 in.) When discolored
Mark 8 2.80 mm (0.110 in.) When discolored
Mark 9 2.90 mm (0.114 in.) When discolored
Mark 0 3.00 mm (0.118 in.) When discolored
Valve body Stator shaft needle bearing contact I.D. Torque converter
side
27.000 27.021 mm (1.0630 1.0638 in.) When worn or
damaged
ATF pump side 29.000 29.021 mm (1.1417 1.1426 in.) When worn or
damaged
ATF pump gear thrust clearance 0.03 0.06 mm (0.001 0.002 in.) 0.07 mm (0.003 in.)
ATF pump gear-to-body clearance Drive gear 0.210 0.265 mm (0.0083 0.0104 in.)
Driven gear 0.070 0.125 mm (0.0028 0.0049 in.)
ATF pump driven gear I.D. 14.016 14.034 mm (0.5518 0.5525 in.) When worn or
damaged
ATF pump driven gear shaft O.D. 13.980 13.990 mm (0.5504 0.5508 in.) When worn or
damaged
Reverse shift
fork
Fork finger thickness 5.90 6.00 mm (0.232 0.236 in.) 5.40 mm (0.213 in.)
Park gear and
pawl
When worn or
damaged
Servo body Shift fork shaft bore I.D. 14.000 14.010 mm (0.5512 0.5516 in.)
Shift fork shaft valve bore I.D. 37.000 37.039 mm (1.4567 1.4582 in.) 37.045 mm (1.4585 in.)
Regulator valve
body
Sealing ring contact I.D. 32.000 32.025 mm (1.2598 1.2608 in.) 32.050 mm (1.2618 in.)
Accumulator
body
Sealing ring contact I.D. 35.000 35.025 mm (1.3780 1.3789 in.) 35.05 mm (1.3799 in.)
Stator shaft Sealing ring contact I.D. 29.000 29.021 mm (1.1417 1.1423 in.) 29.050 mm (1.1437 in.)
03/07/29 09:04:35 61S0X050_020_0014