Honda 2004 Odyssey, Руководство по обслуживанию

Страница: 1217 / 2459

＊０１
Ｓ０Ｘ４Ａ００Ｄ１４３０００１４７８１ＫＢＡＴ００
０１
Ｓ０Ｘ４Ａ００Ｄ１４３０００１４７８１ＭＡＡＴ００
19-16 19-16
Conventional Brake Components
Master Cylinder Replacement Master Cylinder Inspection
C
E
25 N·m (2.5 kgf·m, 18 lbf·ft)
F
D
ABS:
10 x 1.0 mm
15 N·m
(1.5 kgf·m,
11 lbf·ft) G
A
B
ABS/TCS:
12 x 1.0 mm
19 N·m
(1.9 kgf·m,
14 lbf·ft)
RESERVOIR
RESERVOIR CAP
RESERVOIR SEAL
STRAINER
MASTER CYLINDER
SCREW
SEAL
GROMMETS
Do not spill brake fluid on the vehicle; it may
damage the paint; if brake fluid does contact the
paint, wash it off immediately with water.
1. Disconnect the brake fluid level switch connectors
(A), and remove the reservoir cap (B).
2. Remove the brake fluid from the master cylinder
reservoir (C) with a syringe.
3. Disconnect the brake lines (D) from the master
cylinder. To prevent spills, cover the hose joints
with rags or shop towels.
4. Remove the master cylinder mounting nuts (E).
5. Remove the master cylinder (F) from the brake
booster (G). Be careful not to bend or damage the
brake lines when removing the master cylinder.
6. Install the master cylinder in the reverse order of
removal.
NOTE:
• Before reassembling, check that all parts are free of
dust and other foreign particles.
• Do not try to disassemble the master cylinder
assembly. Replace the master cylinder assembly with
a new part if necessary.
• Do not allow dirt or foreign matter to contaminate the
brake fluid.
Check for damage.
Check for blockage
of vent holes.
Check for damage and
deterioration.
Remove accumulated
sediment.
Check for leaks, rust, and
damage.
Check for damage and
deterioration.
Check for damage and
deterioration.
03/07/29 09:53:56 61S0X050_190_0016