Honda 2004 Odyssey, Руководство по обслуживанию

Страница: 1158 / 2459

＊０６
＊０７
２０
＊０８
17-39
A
Press
A
B
26. Move the special tool back and forth several times
to make sure the piston seal ring fits snugly in the
piston.
27. Wrap vinyl tape around the rack teeth and rack end
edges, then coat the surface of the tape with power
steering fluid. Make sure that the vinyl tape is
wrapped carefully so that there is no stepped
portion.
28. Coat the inside surface of the new cylinder end seal
(A) with power steering fluid, then install it onto the
steering rack with its grooved side toward the
piston. When installing the cylinder end seal, be
careful not damage the lip of the seal with the
edges or teeth of the steering rack.
29. Remove the vinyl tape from the steering rack, then
remove any adhesive residue.
30. Grease the steering rack teeth, then insert the
steering rack into the gearbox housing. Be careful
not to damage the inner surface of the cylinder wall
with the rack edges.
31. Insert a deep socket wrench (A) onto the steering
rack as shown.
32. Install the cylinder end seal (B) into the bottom of
the cylinder by pressing on the tool with a press.
Do not push on the tool with excessive force as it
may damage the cylinder end seal.
33. Remove the tool, and center the steering rack.
(cont’d)
03/07/29 09:49:38 61S0X050_170_0039