Honda 2004 Odyssey, Руководство по обслуживанию

Страница: 1222 / 2459

０１
０２
０３
Ｓ０Ｘ４ＡＺ４Ｄ１４３０００１４８１１ＫＢＡＴ００
’99-01 Models
19-21
Rear Brake Shoe Replacement
C
B
A
A
B
A
Frequent inhalation of brake pad dust, regardless of
material composition, could be hazardous to your
health.
• Avoid breathing dust particles.
• Never use an air hose or brush to clean brake
assemblies. Use an OSHA-approved vacuum
cleaner.
NOTE: During rear brake shoe replacement, do not
push either of the wheel cylinder pistons (A) into the
cylinder too far. If you do, brake fluid could seep into
the space behind the piston cup (B). When the piston
returns to its normal position, a small amount of brake
fluid (C) comes with it, which could be mistaken for a
piston cup leak. To avoid this mistake, always inspect
the wheel cylinder for leakage before removing the
brake shoes.
1. Raise the rear of the vehicle, and support it with
safety stands in the proper locations
(see page 1-15).
2. Release the parking brake, and remove the rear
brake drum (see step 7 on page 18-23).
3. Before you touch the brake shoes, carefully pull
back the bottom of the wheel cylinder boots, and
check for brake fluid leakage. If the inside of the
cylinder is wet with brake fluid, replace the wheel
cylinder.
4. To keep the pistons from popping out or shifting to
one end of the wheel cylinder, place a suitable
elastic band (A) around the ends of both pistons.
5. Remove the tension pins (A). Compress each return
spring (B), and then turn the pin so its flattened end
lines up with the slot in the spring.
(cont’d)
03/07/29 09:53:59 61S0X050_190_0021