Honda 2004 Odyssey, Руководство по обслуживанию

Страница: 1427 / 2459

０１
０２
０２
Ｓ０Ｘ４Ａ００Ｊ２６２０００３１２０１ＫＤＡＴ００
20-62
Interior Trim
Headliner Removal/Installation
B
A
C
Fastener Locations
: ET screw, 4
5 x 0.8 mm
4 N·m
(0.4 kgf·m,
3 lbf·ft)
D
B
A
C
B
: Screw, 4
Fastener Locations
5 x 0.8 mm
Fastener Locations
: ET screw, 4
5 x 0.8 mm
4 N·m
(0.4 kgf·m,
3 lbf·ft)
C
B
A
B
NOTE:
• When prying with a flat-tip screwdriver, wrap it with
protective tape to prevent damage.
• Take care not to bend or scratch the headliner.
• Be careful not to damage the dashboard or other
interior trim.
1. Remove these items (see page 20-58):
• Front door opening trim, both sides as necessary
• Front pillar trim, both sides
• Sliding door opening trim, both sides as
necessary
• Front seat belt upper anchor bolt, both sides
2. Remove these items (see page 20-59):
• Quarter pillar trim, both sides
• Quarter glass opening trim, both sides as
necessary
• Rear pillar trim, both sides
3. Third row seat belt retractor cover, for some
models (see step 1 on page 23-13).
4. Remove the sunvisor (A) and holder (B) from both
sides.
–1 Remove the ET screws.
–2 Remove the sunvisor from the body and holder.
–3 Disconnect the vanity mirror light connector
(C).
–4 Using a flat-tip screwdriver, push the hook (D),
and turn the holder 90°, then pull it out.
5. If equipped, remove the roof console.
–1 Remove the lens (A).
–2 Remove the screws.
–3 Pull out the roof console (B), and disconnect
the front individual map light connector (C).
6. Remove the caps (A), and remove the ET screws
and washers (B), then remove the grab handles (C)
(driver’s and front passenger’s).
03/07/29 10:01:46 61S0X050_200_0064