Honda 2004 Odyssey, Руководство по обслуживанию

Страница: 626 / 2459

Symptom Probable cause(s) Notes
14-13
•
•
•
•
•
•
•
•
•
•
•
•
Late shift after
shifting from N to
D4 and D3, or
excessive shock
when shifted into
D4 and D3 1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
Shift solenoid valve C
defective
A/T clutch pressure
control solenoid valves
A and B defective
Shift cable broken or out
of adjustment
Joint in shift cable and
transmission or body
worn
Shift fork shaft stuck
CPC valve A stuck
Foreign material in
separator plate orifice
Shift valve C defective
Servo control valve
defective
1st accumulator defective
1st check ball stuck
1st clutch defective Check the D4 indicator, and check for loose connectors.
Inspect the O-ring, and check the shift solenoid valve
for seizure.
Inspect the A/T clutch pressure control solenoid valve
body gasket and ATF feed pipes for wear and damage.
If the A/T clutch pressure control solenoid valve is stuck,
inspect the CPC valves.
Check for a loose shift cable at the shift lever and the
transmission control shaft.
Check the ATF strainer for debris. If the ATF strainer is
clogged with particles of steel or aluminum, inspect the
ATF pump. If the ATF pump is OK, find the damaged
components that caused the debris. If no cause for the
contamination is found, replace the torque converter.
Check the 1st clutch pressure.
Inspect the clutch piston, clutch piston check valve, and
O-rings. Check the spring retainer for wear and damage.
Inspect the clutch-end-plate-to-top-disc clearance. If the
clearance is out of tolerance, inspect the clutch discs
and plates for wear and damage. If the discs and plates
are worn or damaged, replace them as a set. If they are
OK, adjust the clutch end plate clearance.
Late shift after
shifting from N to
R 1.
2.
3.
4.
5.
6.
7.
8.
9.
Shift solenoid valve C
defective
A/T clutch pressure
control solenoid valves
A and B defective
Shift cable broken or out
of adjustment
Joint in shift cable and
transmission or body
worn
Shift fork shaft stuck
Foreign material in
separator plate orifice
Reverse CPC valve
defective
4th accumulator
defective
4th clutch defective Check the D4 indicator, and check for loose connectors.
Inspect the O-ring, and check the shift solenoid valve
for seizure.
Inspect the A/T clutch pressure control solenoid valve
body gasket and ATF feed pipes for wear and damage.
If the A/T clutch pressure control solenoid valve is stuck,
inspect the CPC valves.
Check for a loose shift cable at the shift lever and the
transmission control shaft.
Check the ATF strainer for debris. If the ATF strainer is
clogged with particles of steel or aluminum, inspect the
ATF pump. If the ATF pump is OK, find the damaged
components that caused the debris. If no cause for the
contamination is found, replace the torque converter.
Check the 4th clutch pressure.
Inspect the clutch piston, clutch piston check valve, and
O-rings. Check the spring retainer for wear and damage.
Inspect the clutch-end-plate-to-top-disc clearance. If the
clearance is out of tolerance, inspect the clutch discs
and plates for wear and damage. If the discs and plates
are worn or damaged, replace them as a set. If they are
OK, adjust the clutch end plate clearance.
(cont’d)
03/07/29 09:29:17 61S0X050_140_0016