Fairplay ZX, Руководство пользователя

Страница: 154 / 168

PAINT
Read section A and B completely prior to operation or repair of golf car
M-2
Follow the paint manufacturer's recommendations for specific painting procedures and information.
All painting must be done in an area with adequate ventilation to safely disperse harmful vapors.
Wear eye protection and respirator, following manufacturers’ instructions to protect from
overspray and air borne mist.
Provide protective practices so as to avoid painting that exceeds the vehicle and neighboring
range.
Minor scratches: For minor scratches, FAIRPLAY suggests the following steps be taken to repair the
FAIRPLAY vehicle body.
I. Clean thoroughly the surfaces with ethanol and dry.
II. Touch up damaged area with sequential coats (two coats minimum recommended, allowing 30-45
minutes between coats, increasing to 45-60 minutes in higher humidity) using brush on touch-up
paint, until coating layer is visible, slightly above the surface of the part.
III. After painted for 2 hours, use 400 grit "wet" sand paper to blend touch up area level with the rest of
the part being repaired. Use a polishing compound (3M Finesse or automotive grade) to renew
gloss and to further blend and transition newly painted surface.
IV. Clean the surface..
V. (Optional but recommended) Follow this process with clear coat to renew and protect depth of
finish.
VI. Wax or polish with Carnauba base product, available at any automotive parts distributor.
Larger scratches:
For larger scratches, FAIRPLAY suggests the following steps be taken to repair
the Durashield
TM
vehicle body.
1. Use 400 grit sand paper to polish the surface need painting.
2. Clean thoroughly the surfaces with ethanol and dry.
3. Mask the area not to be painted around the scratches (common masking tape is adequate) prior to
repair and use aerosol type touch-up paint.