Fairplay ZX, Руководство пользователя

Страница: 149 / 168

ACCESSORY WIRINGS
Read section A and B completely prior to operation or repair of golf car
L-2
Fig. L1: DVOM
A typical DVOM (digital volt ohm meter) is shown (Ref Fig. L1). A recommended model is available
through the FAIRPLAY Service Parts Department. For the purpose of this section, the red probe (+) and
black probe (-) are used. Any DVOM may be used; however, the control, display, accuracy, and features
may vary depending on the make and model. Always follow the meter manufacturer's recommendations
and instructions for the use and care of the meter.
In order to effectively troubleshoot the circuits that include the horn, lighting, brake/turn signals and
gauges, the technician must be able to use the wiring diagram and a DVOM.
The wiring diagram shows the path followed by voltage or a signal from its origination point to its
destination (Ref Fig. L2). Each piece of wire is indicated with colors.
The technician should use simple logic troubleshooting in order to reduce the number of steps required
to isolate the problem.
Example 1: If the vehicle will not start and none of the lights function (or burn dimly) the battery should
be tested before trying to troubleshoot the lighting circuit.