Fairplay ZX, Руководство пользователя

Страница: 118 / 168

Electronic Speed Control (Non-PDS)
Read section A and B completely prior to operation or repair of golf car
I-11
acceleration rate.
Rev Accel Rate
Setting of the reverse acceleration
rate. A higher number allows a faster
acceleration rate.
1 1 – 3
Pedal Off Regen
This setting is to control the
deceleration regen rate once the
user lets off the accelerator when the
car is moving. A higher number will
stop the car quicker.
2 1 – 3
Motor Type
Setting of motor type. Based on
which motor that the controller
controls, select type 0 for 4.0 HP
motor and type 1 for 5.5 HP motor.
0 0 – 1
Table I 1: controller procedure
Test to controller fault
When golf car works abnormally or suddenly stops working on the road, we can firstly find out the cause
according to the fault code. Steps are following:
Firstly, turn off the car by key, and then turn the FWD/REV for six times. The controller will send fault
warning sound, from which we can check the controller with the retrieval table (Table I2). Lastly, we can
find the parts fault.
Besides, we can check the fault with PC. If the computer installs SXDC.GC controller software, we can
connect it to the controller, and the computer will show the parameter setup screen. Click RUNTIME,
then we can check it and find out the fault code.
Fig.I 6: FWD/REV switch
Continuously press the forward/reverse swith up
and down for six times.