Fairplay ZX, Руководство пользователя

Страница: 123 / 168

Electronic Speed Control (Non-PDS)
Read section A and B completely prior to operation or repair of golf car
I-16
Open end wrench 13#--------------------------------- 1
Torque wrench ------------------------------------------ 1
Phillips screwdriver ------------------------------------ 1
Hexagon ring spanner 5# ---------------------------- 1
Remove the seat first.
BL- must be removed before controller discharging, use a large screwdriver to short-circuit the
terminals B+ and B- of controller and have the controller discharged. Be sure to hold screwdriver
by the insulated portion.
Use insulated wrench to remove BL- from battery, and cover the direction selector with rag.
Remove the environmental cover.
When removing wires from controller, take notice of positions of the wires on the controller (Ref
Fig. I2)
Remove the controller mounting bolts and remove the controller. Mount new controller and reconnect
wiring. Tighten the controller mounting bolts to torque of 12-15 N·m, and tighten the terminal bolt to
torque of 15-19 N·m.
Replace the environmental cover and tighten the mounting bolts to torque of 12-15 N·m.
Reconnect the BL- battery cable and replace the seat.
SOLENOID REPLACEMENT
Tool List Qty. Required
Socket 10# ----------------------------------------------- 1
Open end wrench 8# ---------------------------------- 1
Open end wrench 13#--------------------------------- 1
Ratchet -------------------------------------------------- 1
Insulated wrench 8# ----------------------------------- 1
Rag ------------------------------------------------------- 1
Torque wrench (10-100 N·m)------------------------ 1
Remove the solenoid mounting bolts and remove the solenoid.
Mount new solenoid and reconnect wiring. Tighten the controller mounting bolts to torque of 8-9 N·m,
tighten the #10 terminal nut to torque of 2 N·m, and tighten the 5/16 " terminal nut to 6 N·m.