Fairplay ZX, Руководство пользователя

Страница: 97 / 168

WHEELS AND TIRES
Read section A and B completely prior to operation or repair of golf car
G-2
WHEEL AND TIRE SERVICE
Tool List Qty. Required
Air impact wrench 1
19# Socket 1
Torque wrench (torque wrench over 100) 1
Tire condition should be inspected on a daily basis. Inflation pressure should be checked when
the tires are cool. Ensure that the valve cap should be fitted on after check and tire inflation.
Never exceed inflation pressure rating on tire sidewall.
Use caution when inflating tires. Due to the low volume of these small tires, overinflation can occur in a
matter of seconds. Overinflation could cause the tire to separate from the rim or cause the tire to explode,
either of which could cause personal injury.
The inflation should be determined by the condition of the terrain. See GENERAL SPECIFICATIONS
section for recommended tire inflation pressure. For outdoor applications with major use on grassy areas,
the following should be considered. On hard turf, it is desirable to have a slightly higher inflation pressure.
On very soft turf, a lower pressure prevents tires from cutting into the turf. For vehicles being used on
paved or hard surfaces, tire inflation pressure should be in the higher allowable range, but under no
condition should inflation pressure be higher than recommended on the tire sidewall. All four tires should
have the same pressure for optimum handling characteristics.
Tire Repair
The vehicle is fitted with low pressure tubeless tires mounted on one piece rims.
Generally, the most cost effective way to repair a flat tire resulting from puncture in the tread portion of
the fire is to use a commercial tire plug.
Tire plug tools and plugs are available at most automotive parts outlets and have the advantage
of not requiring the tire be removed from the wheel.
If the tire is flat, remove the wheel and inflate the tire to the maximum recommended pressure for the tire.
Immerse the tire in water to locate the leak and mark with chalk. Insert tire plug in accordance with
manufacturer’s specifications.
If the tire is to be removed or mounted, the tire changing machine manufacturer’s recommendations
must be followed in order to minimize possibility of personal injury.