Fairplay ZX, Руководство пользователя

Страница: 81 / 168

MECHANICAL BRAKES
Read section A and B completely prior to operation or repair of golf car
F-21
Operate the brake lever.
Observe the brake adjuster arm and note if the arm engages the star wheel and attempts to rotate it (Ref
Fig. F16).
Fig. F16: Adjuster Mechanism
If the adjuster arm engages and turns the star wheel, proceed. If the arm fails to engage the star wheel, it
has been damaged and both wheel brake assemblies must be replaced.
If the adjuster arm engages the star wheel but fails to rotate it, the adjuster assemblies must be replaced
with new adjusters. Note the location of the two Teflon coated washers (Ref Fig. F23).
7.Check the condition and operation of the moving anchor assembly (Ref Fig. F23).
Operate the brake lever to check for free motion. The adjuster assembly and brake lever should move
smoothly from front to back on the backing plate. If the moving anchor assembly is damaged or binds
against the backing plate, replace both of the wheel brake assemblies.
A backing plate assembly that shows any indication of galling or gouging is not repairable and
must be replaced with a new wheel brake assembly. Always replace wheel brake assemblies in
pa
8.Inspect the backing plate.
Inspect for gouges, galling or other damage, particularly where the backing plate is contacted by the
brake shoes and by the moving anchor assembly. Replace both backing plates if any gouges or galling is
found.