Fairplay ZX, Руководство пользователя

Страница: 36 / 168

SAFETY
Read section A and B completely prior to operation or repair of golf car
B-15
Inspect all wires and terminals and clean any corrosion from the battery terminals or the wire terminals
with a solution of sodium bicarbonate (baking soda) and wire brush if required.
Use care to connect the battery cables as shown in the following illustration (Ref Fig. B1), connect the
main positive (+) battery cable (BL+) first, other battery connecting cables, and then connect the main
negative (-) cable (BL-) last, tightening the battery post hardware to 60 - 90 in. lbs. (7-10 Nm). Protect the
battery terminals and battery cable terminals with a commercially available protective coating.
Aerosol containers of battery terminal protectant must be used with extreme care. Insulate the
metal container to prevent the metal can from contacting battery terminals which could result in
an explosion.
2 passenger 6 passenger
Fig. B1 Battery Connections
LIFTING THE VEHICLE
Tool List Qty. Required
Floor jack.............................................................. 1
Jack stands .......................................................... 4
Chocks ................................................................. 4
Some servicing operations may require the front, rear or the entire vehicle to be raised.
To prevent possible injury or death, be sure the vehicle is on a firm and level surface. Never get
under a vehicle while it is supported by a jack. Use jack stands and test the stability of the
vehicle on the stands before getting under the vehicle. Always place chocks in front and behind
the wheels not being raised. Use extreme care since the vehicle is extremely unstable during the
lifting process.
To raise the entire vehicle, install chocks in front and behind each front wheel (Ref Fig.B2). Center the
jack under the rear frame crossmember. Raise the vehicle and locate a jack stand under the outer ends
of the rear axle.
FRONT FRONT