Fairplay ZX, Руководство пользователя

Страница: 17 / 168

GENERAL INFORMATION& ROUTINE MAINTEN NCE
Read section A and B completely prior to operation or repair of golf car
A-8
VEHICLE CONTROL SYSTEM
According to the monthly interval, the vehicle control system may be tested by releasing the accelerator
pedal and allowing the vehicle to run upward steep slope, and it indicates that the brake system may
function if the vehicle is braked when the pedal is released. This vehicle inspection should be carried out
by trained technician.
TIRES
The condition should be inspected on a daily basis. Inflation pressures should be checked on a weekly
basis when the tires are cool. Be sure to re-install the valve dust cap after checking or inflating tire. For
additional information, refer to WHEELS AND TIRES section.
CARE AND CLEANING OF THE VEHICLE
To prevent cosmetic damage, do not use any abrasive or reactive solvents to clean plastic parts.
It is important that proper techniques and cleaning materials be used.
Normal cleaning of vinyl seats and plastic or rubber trim requires the use of a mild soap solution applied
with a sponge or soft brush and wipe with a damp cloth.
Removal of oil, tar, asphalt, shoe polish, etc. will require the use of a commercially available vinyl/rubber
cleaner.
The painted surfaces of the vehicle provide attractive appearance and durable protection. Frequent
washing with lukewarm or cold water is the best method of preserving the painted surfaces.
Do not use hot water, strong soap bath or harsh chemical detergents.
Rubber parts should be cleaned with non-abrasive household cleaner.
Occasional cleaning and waxing with non-abrasive products designed for 'clear coat' automotive finishes
will enhance the appearance and durability of the painted surfaces.
Corrosive materials used as fertilizers or for dust control can collect on the underbody of the vehicle.
These materials will expedite the corrosion of underbody parts. It is recommended that the underbody be
flushed occasionally with plain water. Thoroughly clean any areas where mud or other debris can collect.
Sediment packed in closed areas should be loosened to ease its removal, taking care not to chip or
otherwise damage paint.