Fairplay ZX, Руководство пользователя

Страница: 105 / 168

MOTOR
Read section A and B completely prior to operation or repair of golf car
H-6
To install armature on the bearing / end cap component, support the inner race of bearing so as
to avoid damage.
Heat relevant components moderately so as to press the armature into the new bearing.
Remove the brush from commutator. Ensure that the spring is located at the rear of the brush and
capable of smooth action.
REPLACING EXCITING COIL
Tool List Qty. Required
Wrench
13# ............................................. 1
Ratchet
.................................................... 1
Socket, specification: 10#.......................... 1
To replace the exciting coil (8), remove the exciting coil terminal components (9) in positions S1 and S2
(Ref Fig. H3).
Remove the bolt (10) securing the exciting coil commutator end cap (11) onto the motor casing (4).
Remove the exciting coil.
Exciting coil replacement is the reverse order of disassembly.
REPLACING BRUSH
Tool List Qty.
Required
10# Wrench ............................................... 1
13#
Ratchet
............................................. 1
Socket, specification 5/16 inch 1/4 inch..... 1
Measure the brush as shown in the figure, and replace the brush if the minimum dimensions
reaches .0.78 inch (20 millimetre) (Ref Fig. H4).