Fairplay ZX, Руководство пользователя

Страница: 46 / 168

FRONT SUSPENSION AND STEERING
Read section A and B completely prior to operation or repair of golf car
C-9
Fig. C7: Steering Wheel Replacement
Universal Joint Replacement
Tool List Qty. Required
Air impact wrench ................................................. 1
Socket 13# ........................................................... 1
White chalk........................................................... 1
First align the front wheels to the straight ahead position, remove the set bolt (27) from both ends of the
universal joint, allow the universal joint to draw back to its center and separate itself from the steering
shaft (12) and steering gear case (14) (Ref Fig. C8), then draw the soldering cup back to the spline
housing, and use white chalk to draw a straight marking line at the middle junction of the universal joint.
Replace the universal joint in reverse sequence.
When universal joint installation, alignment to the white marking line must be guaranteed, and
the new universal joint must be installed such that the spline shaft joint and spline housing joint
cross each other perpendicularly.
Tighten the set bolt (27) to 16-17.5 ft lb (23-25 N.m). Use grease nozzle (26) to add grease to universal
joint.
Steering Shaft Replacement
Tool List Qty. Required
Torque wrench...................................................... 1
Air impact wrench ................................................. 1
Socket 16# ........................................................... 1
Open end wrench 16# .......................................... 1