Caution: Please read through the instructions carefully. Installer is responsible for
damage if instructions are not followed properly. Look behind each drill or cut loca-
tion BEFORE YOU DRILL OR CUT. Installer is responsible for damage (i.e. drilling/
cutting into a wiring harness, battery, fuel tank etc.). Extra installers will be helpful in
some parts of the installation. Refer to vehicle’s maintenance manual for torqueing
specifications on reused hardware.
BOX-112
Club Car DS
Utility Box Mounting Kit
Installation Instructions
Contents of BOX-112 Utility Box Kit:
a
(1 ea.) Utility Box Support Frame, Driver Side
b
(1 ea.) Utility Box Support Frame, Passenger Side
c
(2 ea.) Vertical Support Brackets
d
(1 ea.) Latch Kit (contents on Next Page)
e
(1 ea.) Box of Hardware (Contents on Next Page)
NOTE: Top on DS 81-00.5 (2-piece seat back) and TOP-0101 struts cannot be
installed with Thermoplastic or Poly Box.
