![background image](http://html.mh-extra.com/html/epiphan/pearl-2-rackmount/pearl-2-rackmount_user-manual_2417784188.webp)
Pearl-2 User Guide
Configure LDAP user authentication
Alternatively, you can regain access to Pearl-2 if you apply the factory default configuration preset using the
touch screen,
Apply a configuration preset using the touch screen
. The factory default configuration will
change the current settings on Pearl-2, see
The Factory default configuration preset
.
Configure LDAP user authentication
You can use the Lightweight Directory Access Protocol (LDAP) to authenticate users. Specify user roles by
using group DNs for users who log in as an Administrator, Operator, or as a Viewer.
The system has only
one
admin user and
one
operator. LDAP users must log in as either an admin or an
operator and do not have their own private profiles. Any LDAP users with the name admin, operator, or
viewer are ignored and the local accounts are used instead.
When enabled, LDAP authentication is an
alternative
to the regular system user names and passwords. You
may still login as
admin
,
operator
or
viewer
using the passwords for those accounts.
LDAP replaces the local
viewer
account instead of working side-by-side with it when LDAP is
enabled and the viewer account has no password (either there is no global viewer password
configured or the channel overrides the global password with a blank password). In this case, the
viewer must authenticate with LDAP and
cannot
use the default
viewer
account with a blank
password to log in.
For security reasons, you should configure passwords for the local accounts. See
.
These instructions assume you have a pre-configured LDAP server. The server must support anonymous
binding or have a special bind account with search access privileges. Note that Active Directory does not
support anonymous binding. LDAP referrals, restrictions and failovers are not supported.
To configure LDAP authentication:
1. Login to the Admin panel as
admin
2. From the Configuration menu, select
Security
. The Security configuration page opens.
3. In the
LDAP authentication
section, check
Enable LDAP authentication
. Uncheck the check box
to disable LDAP authentication.
175
Содержание Pearl-2 Rackmount
