epiphan Pearl-2 Rackmount, Руководство пользователя

Страница: 22 / 497

Pearl-2 User Guide Front and back view Pearl-2
Table 4 Pearl-2 Rackmount and Pearl-2 Rackmount Twin back panel descriptions
Label Name Description
Power jack Plug the power supply in here. Always use the provided power supply.
HDMI in Connect HDMI and DVI signals.
4K HDMI in Connect up to 4K
1
HDMI signals.
SDI in Connect SDI signals.
XLR audio in
The four XLR ports can function as two, professional line level
left/right stereo pairs (XLR A pair and XLR B pair) or as four mono
inputs, see AV inputs.
The XLR ports are professional line-level inputs and are calibrated for
+ 4.0 dBu signals.
RCA audio in
The RCA ports are consumer line level, left/right stereo pair and are
calibrated for - 10 dBV signals.
HDMI Out For displaying a source or channel on an external display (up to 4K
1
).
USB 3.0 ports
For connection of external hard drives, flash drives, USB webcameras,
USB microphones or control interfaces. See
Record for recording to a
USB drive.
RJ-45 Ethernet
Auto-sensing gigabit Ethernet 10/100/1000 Base-T network port and
support for NDI and NDI|HX (Tx/Rx). See
Configure network settings
for setup instructions.
1
Requires 4K feature add on
The SDI ports on the back of Pearl-2 can be delicate. Be careful to avoid sharp impacts or pressure
such as balancing the system on its back with the SDI ports against a hard surface. Rough
treatment of the SDI ports could result in loss of functionality for that port.
9