epiphan Pearl-2 Rackmount, Руководство пользователя

Страница: 162 / 497

Pearl-2 User Guide Reassign a registered resource
disconnect from the network, and consider performing a factory reset on one of the Pearl-2
resources to remove the possibility of having duplicate resources.
You can also use this procedure if you've performed a factory reset, which resulted in an orphaned Kaltura
resource registration and you need to reregister your Pearl-2 using the same resource name to take over the
resource instance that is still registered in Kaltura.
Before you begin, you should already have:
l
A Kaltura instance created
l
Access to the Kaltura Management Console (KMC)
l
Your Kaltura partner ID
l
Your Kaltura administrator secret
l
Your Kaltura user ID
To enable Pearl-2 as a resource and register with an existing resource name using the Admin panel:
1. Login to the Admin panel as admin , see Connect to the Admin panel .
2. From the Configuration menu, click CMS . The Content management system configuration menu
opens.
3. From the Choose CMS drop down, select Kaltura and then click Apply .
4. Enter your Partner ID , Administrator secret , and User ID that you got from Kaltura.
5. Change the Resource name to the resource name of the Pearl-2 you are replacing and click Register
device .
6. When you're prompted to take over the events from the existing resource with that same name, click
Yes .
149