S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
2-17
Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x
OL-9285-05
Chapter 2 Troubleshooting Installs, Upgrades, and Reboots
Troubleshooting Cisco SAN-OS Software System Reboots
Step 4
Press the
Tab
key to select the Basic CMOS Configuration
.
You see the System BIOS Setup - Basic CMOS Configuration screen. (See
Figure 2-5
.)
Figure 2-5
BIOS Setup Configuration (CMOS)
Step 5
Change the Boot 1st: field to TFTP.
Step 6
Press the
Tab
key until you reach the Local IP Address field.
Step 7
Enter the local IP address for the switch, and press the
Tab
key.
Step 8
Enter the subnet mask for the IP address, and press the
Tab
key.
Step 9
Enter the IP address of the default gateway, and press the
Tab
key.
Step 10
Enter the IP address of the TFTP server, and press the
Tab
key.
Step 11
Enter the image name (kickstart), and press the
Tab
key. Use the full directory path from the TFTP server
root directory.
Caution
The file name must be entered exactly as it is displayed on your TFTP server. For example, if you have
a file named MDS9500-kiskstart_mzg.10, then enter this name using the exact uppercase characters and
file extensions as shown on your TFTP server.
